m

Our Mission Statement

This is Photoshop's version of Loremer Ipsn gravida nibh vel velit auctoregorie sam alquet.Aenean sollicitudin, lorem quis bibendum auci elit consequat ipsutis sem nibh id elit.
Top

Passenger Elevator

Residential

Office Building

Luxury Hotel

Product Introduction

Owning both advanced technology and sophisticated functional configuration, We have integrated high-end allocation, efficiency, smartness and energy saving, etc. Outstanding features into one and comprehensively applied various fields of technologies, Such as information, environment, energy, and so on, making a contribution to creating rich and colorful urban life.

 A new generation of permanent magnet synchronous gearless  traction machine

High precision sealed bearing, with greater torque and higher efficiency. Technology, which saves more than 30% of energies. Coaxial transmission No need to replace the lubricant, which reduces oil contamination. Eliminate the noise and vibration caused by traditional transmission, which helps realize quietness and smoothness.

Space Saving

The adoption of the compact control cabinet and the permanent magnet synchronous traction machine customized for CANNY saves the space of the hoistway and improves the utilization of the construction space.

Energy Saving and Low Consumption

The LED light has the advantages of long service life, and low energy cost with softer lighting besides, the electricity consumed is just one fifth of that consumed by incandescent light bulb.

Automatic waking device

High precision sealed bearing, with greater torque and higher efficiency. Technology, which saves more than 30% of energies. Coaxial transmission No need to replace the lubricant, which reduces oil contamination. Eliminate the noise and vibration caused by traditional transmission, which helps realize quietness and smoothness.

  • Car wall : Hairline stainless steel
  • Front wall : Hairline stainless steel
  • Vertical column : Hairline stainless steel
  • Operation panel : KL231C, Hairline stainless steel
  • Car door : Hairline stainless steel
  • Floor : KL/JD-4004(PVC)
  • Skirting : Hairline stainless steel

New generation of control system, Leading upgrade

  • Double 32-bit high-performance AR M chip can achieve fault tolerance and monitoring f unction, improving the reliability of the system.
  • Four-layer board surface mount tec hnology and CAN bus serial communication are adopted to ensure the high-speed,reliable transmission of mass data.
  • Grading password is adopted for parameter setting, it is safe and reliable, and can inquire fault records, making maintenance and commissioning much easier.

User friendly technology safe and reliable

Braking Force Self-Detecting and Monitoring Function.

It can test the braking force regularly, and prevent serious accidents f1rom happening by prompting fai lure and stopping elevator from running.

Traction Rope Slide Detection.

It provides real-time monito ring of sliding data, and can automatically enter the safe operation mode for emergency according to requirements.

User friendly Smooth and Comfortable

Frequency conversion door system.

Equipped with effective door load detector capable of self-learning, the speed of door opening and closing can be freely adjusted, making the whole system run comfortably and smoothly.

New generation of VWF Inverter.

Capable of the adjustment of current magnitude and phase and the precise control of driving torque of main engine , so as to ensure the stable running of elevator.

Intelligent Technology, Choice of Heart

IC card intelligent management (Optional)

The renewable energy into electrical energy back to the local power grid use, energy consumption is reduced by 30%.

1. Call

2. Read card at entrance floor

3. Select Floor No. in the elevator car

4. Enter the elevator car

Each floor can be selected for leveling, wit hout pressing any button, it will automatically reach the designated floor of user.

Group controlling intelligent dispatching system (Optional)

 

  • Abiding by the principle of intelligent dispersed principle, carry passengers with highest speed and efficiency.

CANEN energy re-generation feedback technology (optional)

  • The renewab le energy into electrical energy back to the local power grid use, energy consumption is reduced by 30%.
Long-Distance Monitor
Building Automation System
Pre-open Function
Anti-disturbance Function

Advanced Functional Design

Braking Force Self – Detecting

Actively and regularly test the brake force; prevent more serious accident by means of malfunction indication and running prohibition and so on.

Traction Rope Slide Detection

It provides real-time monit oring of sliding data,and can automatically enter the safe operation mode for emergency according to requirements.

Brake detection protection

Brake arm detection switch executes real-time monitor to brake opening / closing. If the brake does not open by the requirements, the system will not start the elevator.

Protection of none door opening out sidedoor zone

Automatic door opening is forbidden under none door zone condition.

Low- speed protection

It prevents elevator from low-speed running outside the control range causing any safety problem(s).

Overload protection

Befor e the elevator shuts the door, if it detects overload signal,the elevator does not shut then,”door-shut button” becomes effective. After it removes overload problem, it re-starts automatically.

Automatic parking in trouble

When the elevator stops in none leveling zone due to any trouble, if it is not caused by safety device action, it executes self-rescue running towards the middle floor direction at low speed. It parks and opens the door at the nearest service floor to prevent from any trapping accident.

Protection of elevator blockage

When the system runs start command, it does not start within preset time nor beca use it is during the elevator travelling, and it does not reach certain distance within preset time as well,the elevator stops accordingly.

Attendant running

When it is under the operator condition,the elevator system operates according to the car command signal. If landing call signal is available, it automatically cuts as per forward landing call.

The door opens automatically after the leveling parking. But it does not shut automatically untilthe operat or presses “door closing button”.

Fire-fighting return

When the fire-fighting switch closes, the system enters into fire-fighting running. The system will remove all the landing calls and car command signals, and it automatically returns to fire-fighting home landing,and the door keeps open.

If the elevator is travelling in reverse direction, it parks at nearby floor, and returns to fire-fighting home landing with the door keeping closed, after that it keeps the door open.

Home landing elevator locking

When the elevator is under automatic condition, when it shuts home landing locking switch, the elevator will complete all the registered car command services, automatically return to home landing, it enters into parking condition.

As soon as locking switch is on, it immediately returns from parking condition and goes into normal running.

Cancel the error-register

If the passenger presses the car comma nd button at certain floor and has registered it by mista ke,(by then the car indicating lamp is bright), if under the condition of none elevator running,you only press the car command button at the same floor to cancel the register. (By then the car indicating lamp dies out.)

Electrified automatic door-opening

Every time when the elevator is electrified,if the car is in the door zone, the ele vator door opens automatically.

Automatic return to home landing

In non-at tenda nt running, if automatic return function to home landing is still effective,and no-landing call signal time fulfills preset time,the elevator returns to home landing automatically.

Automatic stop of the car illumination and fan

If nobody uses the elevator within certain period of time,the car illumination and fan shut off automatically and re-opens on receiving any landing call command(s).

Automatic correction of floor signal

If the floor display position has error, after the system detects terminal switch in the travel, it will automatically correct the floor display.

Cancellation of the reverse command(s) in the car

When the elevator travels to the farthest floor and changes the speed, it removes all the car command register.

Self-diagnostic embedded call button

If you press call button at certain landing for over 20 second,and it stilldoes not disconnect,the system assumes that it is embedded button. It does not register the landing call of the same floor afterwards.

Responsive lamp which corresponds to the button keeps flickering and alarming. When the button disconnects, it exits from above condition.

Re-leveling function

If the elevator parks on the current floor, when too many passengers enter into / leave the elevator, the car is separated from the leveling zone because of wire rope extension or shortening.

The elevator will then travel to the leveling position at low speed under the condition of door-opening.

g19
g18
g17
g16
g15
g13
g12
g11
g10
g9
g8
g7
g6
g5
g4
g3
g2
g1
Still Confused? Let’s have a coffee.