HospitalKLB medical elevator pays attention to humanized design, creates a clean and bright space that is harmonious and unified with the hospital environment, and meets the special needs of the hospital to the greatest extent, and assists medical staff to complete the sacred mission efficiently and quickly.
Secure and stable, safe and reliable
The inner wall of the lift car adopts the stainless steel overlapping uprights and the stainless steel skirting lines, which can be perfectly combined with the high-quality panel materials, thus further highlighting the stable and generous atmosphere.
Actively and regularly test the brake force; prevent more serious accident by means of malfunction indication and running prohibition and so on.
It provides real-time monitoring of sliding data, and can automatically enter the safe operation mode for emergency according to requirements.
Brake arm detection switch executes real-time monitor to brake opening I closing. If the brake does not open by the requirements, the system will not start the elevator.
Automatic door opening is forbidden under none door zone condition.
It prevents elevator from low-speed running outside the control range causing any safety problem(s).
Before the elevator shuts the door, if it detects overload signal, the elevator does not shut then, “door-shut button” becomes effective. After it removes overload problem, it re-starts automatically.
When the elevator stops in none leveling zone due to any trouble, if it is not caused by safety device action, it executes self-rescue running towards the middle floor direction at low speed. It parks and opens the door at the nearest service floor to prevent from any trapping accident.
When the system runs start command, it does not start within preset time nor because it is during the elevator travelling,and it does not reach certain distance within preset time as well,the elevator stops accordingly.
When it is under the operator condition, the elevator system operates according to the car command signal. If landing call signal is available, it automatically cuts as per forward landing call. The door opens automatically after the leveling parking. But it does not shut automatically until the operator presses “door closing button”.
After the fire-fighting switch closes, the system enters into fire-fighting running. The system will remove all the landing calling and car command signals, and it automatically return to fire-fighting home landing, and the door keeps open. If the elevator is traveling reversely, it parks at nearby floor, and returns to fire-fighting home landing with the door keeping closed, after that it keeps the door open.
When the elevator is under automatic condition, after it shuts home landing locking switch, the elevator will complete all the registered car command services, automatically return to home landing, it enters into parking condition. As soon as locking switch opens, it immediately exits from parking condition and throws into normal running.
If the passenger presses the car command button at certain floor and has registered it by mistake, (by then the car indicating lamp is bright), under the condition of none elevator running, you only require to press the car command button at the same floor to cancel the register. (By then the car indicating lamp dies out.)
Every time when the elevator is electrified, if the car is in the door zone, the elevator door opens automatically.
If nobody uses the elevator within certain period of time, the car illumination and fan shut off automatically and re-opens on receiving any landing call command(s).
If the floor display position has error, after the system detects terminal switch in the travel, it will automatically correct the floor display.
When the elevator travels to the farthest floor and changes the speed, it removes all the car command register.
If you press call button at certain landing for over 20 second, and it still does not disconnect, the system assumes that it is embedded button. It does not register the landing call of the same floor afterwards. Responsive lamp which corresponds to the button keeps flickering and alarming. When the button disconnects, it exits from above condition.
In no-operator running, if automatic return function to home landing is still effective, when no-landing calling signal time fulfills preset time, the elevator returns to home landing automatically.
[slick-carousel-slider design=”design-6″ dots=”false” arrows=”false” centermode=”true” variablewidth=”true” slick-slider fade=”true” autoplay=”true” autoplay_interval=”600″]