Mall
Office Building
Luxury HotelThe panoramic Elevator that naturally blends into the environment will not only bring you a smooth and comfortable ride experience, but also a pleasing landscape, but also a flowing landscape of the city. Get new feelings on a short journey and realize the mood that people desire to overlook the city from a flowing perspective.
Technology innovation,
Lighter than traditional traction machine by 50%, saving energy for more
than 40%, no need to replace grease, free maintenance and low noise,
creating a quiet space.
When nobody calls for the elevator in a fixed time period, the light and the
fan in the car will automatically shut off;
When someone calls, the device will automatically start, saving energy during
the standing time.
Advanced intelligent group control system designs the best response plan,
distributes elevator calling requirements, which is intelligent, reliable, and
can improve transport efficiency.
Small jamb (Standard)
Hoist-way door, Jamb:
The initial floor is of the
hairline stainless and other
floors are of the dusting.
Small jamb (Standard)
Hoist-way door: Dusting
steel plate
Jamb: Dusting steel plate
KL-SK 001
Ice gray
KL-SK 005
Ultramarine blue
KL-SK 002
Plane gray
KL-SK 006
Pastel blue
KL-SK 003
Corny yellow
KL-SK 007
Light green
KL-SK 004
Pebble grey
KL-SK 008
Light pink
Actively and regularly test the brake force;prevent more serious accident by means of malfunction indication and running prohibition and so on.
It provides real-time monitoring of sliding data,and can automatically enter the safe operation mode for emergencyaccording to requirements.
Brake arm detection switch executes real-time monitor to brake opening I closing. If the brake does not open by the requirements,the system will not start the elevator.
Automatic door opening is forbidden under none door zone condition.
It prevents elevator from low-speed running outside the control range causing any safety problem(s).
Before the elevator shuts the door, if it detects overload signal,the elevator does not shut then,”door-shut button” becomes effective. After it removes overload problem,it re-starts automatically.
Whenthe elevator stops in none leveling zone due to any trouble,if it is not caused by safety device action,it executes self-rescue running towards the middle floor direction at low speed. It parks and opens the door at the nearest service floor to prevent from any trapping accident.
Whenthe system runs start command,it does not start within preset time nor because it is during the elevator travelling,and it does not reach certain distance within preset time as well,the elevator stops accordingly.
When it is under the operator condition,the elevator system operates according to the car command signal. If landing call signal is available,it automatically cuts as per forward landing call. The door opens automatically after the leveling parking. But it does not shut automatically untilthe operator presses “door closing button”.
After the fire-fighting switch closes, the system enters into fire-fighting running. The system will remove all the landing calling andcar command signals,and it automatically return to fire-fighting home landing,and thedoor keepsopen. If the elevator is traveling reversely,it parks at nearby floor,and returns to fire-fighting home landing with the door kepping closed,after that it keeps the door open.
Whenthe elevator is under automatic condition,after it shuts home landing locking switch,the elevator willcomplete all the registered car command services,automatically return to home landing,it enters into parking condition. As soon as locking switch opens, it immediately exits from parking condition andthrows into normal running.
If the passenger presses the car command button at certain floor and has registered it by mistake,(by then the car indicating lamp is bright), under the condition of none elevator running,you only require to press the car command button at the same floor to cancelthe register. (By then the car indicating lamp dies out.)
Everytime when the elevator is electrified,if the car is in the door zone,the elevator door opens automatically.
If nobody uses the elevator within certain period of time,the car illumination and fan shut off automatically and re-opens on receiving any landing call command(s).
If nobody uses the elevator within certain period of time,the car illumination and fan shut off automatically and re-opens on receiving any landing call command(s).
If the floor display position has error,after the system detects terminal switch inthe travel,it will automatically correct the floor display.
Whenthe elevator travels to the farthest floor and changes the speed,it removes all the car command register.
If you press call button at certain landing for over 20 second,and it stilldoes not disconnect,the system assumes that it is embedded button. It does not register the landing call of the same floor afterwards. Responsive lamp which corresponds to the button keeps flickering and alarming. When the button disconnects, it exits from above condition.
In no-operator running,if automatic return function to home landing is still effective,when no-landing calling signal time fulfills preset time,the elevator returns to home landing automatically.
Under the non-balancing conditions, Machine Roomless elevator, It automatically alarms after entering into the door zone with the manual door-open aid. Note:Electric brake release for KLWG machine roomless panorama elevator.
[slick-carousel-slider design=”design-6″ dots=”false” arrows=”false” centermode=”true” variablewidth=”true” slick-slider fade=”true” autoplay=”true” autoplay_interval=”600″]